Description
Axion XM has a space-saving and pocket-sized design and weighing less than 250 grams. The device is easy to grip and operate by right-handed and left-handed people due to the symmetrical arrangement of buttons on the upper panel.
In Axion XM30F thermal imaging devices, space-saving dimensions fit together with a high detection potential. High-quality optics and a thermal imaging sensor with a 12-micron pixel will help to observe an object with 1.8 meters high on distant approaches, up to 1300 meters. Axion XM is designed for constant, often hard use. A magnesium alloy housing is light and strong at the same time. The housing reliably protects the internal components of a thermal imaging device from shocks, drops, moisture, heat or cold. At the same time a metal housing effectively removes the heat from electronics, minimises image noise and increases consistency of the device operation during long-term observation.
A quick-change APS3 rechargeable battery provides 5 hours of continuous operation of the thermal imaging device on a single charge. The battery is removed from a battery housing and replaced with a new one in seconds. The battery is charged in a special device or inside the device from a PC, household power system or power bank via USB. The same sources are used for external power supply of a thermal imaging device.
Use the brightness and contrast adjustments to maximise the detail and informative value of the image in specific observation conditions. The User Mode function saves selected brightness and contrast settings in the device’s memory providing optimal image quality for the next use of the thermal imager immediately, with no additional adjustments needed.
Highly Sensitive Thermal Sensor
The Axion XM30F incorporates a highly sensitive 320×240, 12µm, <50mK NETD thermal sensor which, in combination with the 50Hz refresh rate, will provide the user with a crisp and smooth thermal image, and boasts a detection range of up to 1300m of a standard 1.8m object in total darkness – even in difficult conditions such as fog, rain, and high levels of humidity.
Exceptional Optics
Features a powerful, focusable 28mm F1.2 objective lens, which works in combination with the thermal sensor to provide these impressive detection capabilities. To ensure a comfortable viewing experience, the base magnification increases by four times at 2x-8x, with a zoom which can change either gradually by 2x steps, or continuously – allowing the user to set the ideal magnification ratio and visible field of view to suit any situation. Couple this with the 7.8°x5.9° field of view, and this device can offer exceptional control over the observation area.
AMOLED Display
All of this is presented on the Axion XM30F’s frost-resistant, high contrast 640×400 AMOLED display, which provides improved colour rendering for a significantly sharper and much smoother image, even in adverse weather conditions.
Eight Colour Palettes
The Axion XM30F also offers 8 colour palettes, so the user can observe their field of view more effectively, optimising the Axion XM30F for specific tasks, and reacting to changing conditions in the observation area. White Hot, Black Hot, and Red Hot are the perfect choice for object detection; Rainbow and Ultramarine are great for recognition and identification; and Red Monochrome, Sepia, and Violet are ideal for night-time observation.
Up to 5 Hours of Battery Life
The quick-change APS3 rechargeable battery will provide the Axion XM30F with up to 5 hours of battery life (depending on temperature). Removing and replacing the battery can be achieved quickly and easily, and charging is as simple as connecting to a PC, household power system, or power bank via USB. A dedicated APS battery charger is also available (not included).
Instant Start-Up and Display Off Mode
The Axion XM30F features “Display Off” mode, which deactivates image transmission to the AMOLED display by taking the brightness down to its minimum level – entering standby mode without powering the device down . When the device is in “Display Off” mode, switching it back on is quick and easy using the Instant Start Up feature. This can be achieved with a single short press of the power button, and allows the user to get back up and running in just 3 seconds!
Magnesium Alloy Bodyshell
The rugged magnesium alloy housing has been designed with constant, hard use in mind; meaning the Axion XM30F is both lightweight and robust in equal measure. Reliably protecting the internal components from shocks, scrapes, cold, heat, and moisture, the magnesium alloy housing will also act as a heat sink, dissipating heat generated by the inner electronics, minimising noise, and increasing operational consistency during long-term observation.
Operating Temperatures
This thermal imaging monocular has been designed for use within a wide range of temperatures, operating reliably and effectively in extreme temperatures from -25 to +50°C.
IPX7 Waterproof Rated
The IPX7 waterproof rating provides protection against tough conditions, including heavy rain, fog, high humidity, and snow. The IPX7 rating means this device is even submersible in 1m of water for up to 30 minutes.
Built-In Video & Still Image Recorder
Capture once-in-a-lifetime moments with built-in video and still image recording capabilities. The Axion XM30F’s 16GB internal memory can store hours of videos and tens of thousands of still images at just the touch of a button. All footage can be easily copied onto a computer using a USB-C cable; or, with the built-in Wi-Fi module and Stream Vision 2 connectivity, the user can easily view and share memorable moments, straight from the cloud.
Integrated Wi-Fi Module
The built-in Wi-Fi module with dual band Wi-Fi (2.4/5GHz), vastly improves bandwidth and connection stability, as well as providing a faster rate of data transfer and noise immunity – all for a more reliable and consistent operation between the device and a smartphone or tablet.
Stream Vision 2
This built-in Wi-Fi module enables quick connection to Android or iOS smartphones or tablets using the Stream Vision 2 app, offering a wide range of connectivity features, including:The ability to use a mobile phone as a wireless remote to control and adjust the device’s settings. View all the changes made on a smartphone or tablet screen in real-time. This feature also allows for remote recording of footage or capture of still images. A gallery of photos and videos captured on the Axion XM30F that can be browsed through and downloaded. These videos and images can also be shared easily. The ability to remotely update the device’s firmware, meaning users can enjoy all the latest features and ensure their Axion XM30F is always running to the best of its ability.
16GB Storage
Offers 16GB of built-in storage, meaning images and videos captured on the device can be stored either on the device’s internal memory, or, alternatively, on the 16GB of FREE cloud storage offered on the Stream Vision 2 app. Photos and videos can also be downloaded to a laptop or PC via simple connection of a Micro USB cord.
Specifications
Microbolometer
- Type: uncooled
- Resolution, Pixels: 320×240
- Pixel Pitch, µm: 12
- Frame Rate, Hz: 50
Optical Characteristics
- Optical Magnification, x: 3
- Smooth Digital Zoom: 3-12
- Digital Zoom, x: x1, x2, x4
- Relative Aperture, D/f’: 1.2
- Minimum Observation Distance, m/y: 3/3.28
- Exit Pupil Diameter, mm: 4
- Angular Field of View (Horizontal x Vertical), degree: 7.8×5.9
- Linear Field of View (Horizontal x Vertical), m at 100 m: 13.7×10.3
- Eyepiece Focus Range, Diopter: +4 / -5
- Detection Distance for Deer-Sized Objects, m/y:n 1300/1421.7
Display
- Type: AMOLED
- Resolution, Pixels: 640×400
Operational Characteristics
- Power Supply, V: 3 – 4.2
- Battery Type/Capacity/Nominal Output Voltage: APS 3 Li-ion Battery Pack / 3200 mAh / DC 3.7 V
- External Power Supply: 5 V (USB)
- Battery Run Time at t=22°C, hours*: 7
- Degree of Protection, IP Code (IEC60529): IPX7
- Operating Temperature Range, °C / °F: -25 … +40 / -13 – +104
- Dimensions, mm/inch: 144x40x69 / 5.67×1.46×2.72
- Weight (without battery), kg/oz: 0.25/8.81
Video Recorder
- Photo/Video Resolution, Pixels: 528х400
- Video/Photo Format: .mp4 / .jpg
- Built-in Memory: 16 GB
Wi-Fi Channel**
- Frequency: 2.4/5 GHz
- Standard: IEEE 802.11 b/g/n/ac